Liquid wax sits somewhere in the middle of the effort vs results spectrum. Again, shake before using, in order to mix the ingredients. Step 2: Rub in the wax with one side of a damp microfiber towel. Take your time on each panel to achieve the best result.
Step 3: Buff out the remaining product with the other, clean side of the microfiber towel. Step 4: Repeat the process if needed. Beautiful shine, even beaded water well, and the dust protection is great. Apply a small amount onto the foam polishing pad and buff using circular motions. Step 2: Reapply if needed using the same motion. Step 3: Use a clean, soft microfibre towel to give the bodywork a thorough wipe over and buff, checking reflections and gaps from all angles to ensure you have removed every last trace of product.
However, do give yourself time to familiarise yourself with the process before tackling your pride and joy. Buffers are more suited to vehicles with large, flat panels. Smaller cars with numerous undulations and crevices can present more of a challenge so bear that in mind before choosing the right application method for you.
Step 1: Apply the wax using a specialist applicator placed over the buffer pad. Step 3: Now switch on the machine and glide it across the surface while applying minimal pressure.
Step 2: Use this to buff off the dried wax using long smooth strokes. Avoid buffing in a circle, as this will leave swirl marks on your paint. Step 3: Most importantly, simply guide the tool, and do not apply too much pressure.
Turtle Wax have a full range of black wax and polish products specially made for black cars that fix the imperfections and help protect the black paintwork which can often suffer from UV damage and swirl marks. For the easiest and quickest application, we recommend the Turtle Wax Jet Black Spray Wax with an industry leading black tinted formula. Step 1: Shake well prior to the application. Apply on a clean surface and out of direct sunlight. The most common ingredient found in car wax is Carnauba wax.
This specific ingredient works great in auto wax because it will not wash off with water, withstands high heat and leaves a beautiful, glossy finish when formulated with other ingredients.
Many waxes will be a mix of natural waxes like carnauba wax, solvents, and colorants. Our Ceramic Sealant is easily applied and delivers a shine that lasts four to five times longer than car wax. We hope that this guide helped you understand the difference between polishing and waxing your car. If you have any questions about using our products we're always here to help! Please feel free to contact us.
If you are already registered, please log in. Email Address. Forgot your password? For both wax paste and liquid paint sealant it is important to start with a small amount of product. If you leave the wax on the car for too long it becomes hard and very difficult to remove.
A good place to start is on the front fender panel located on both sides of the car above the front wheels and extending to the front of the vehicle. From here you would continue around the vehicle completing each section of the car until finished. Apply the wax using a small, circular motion. A thin layer of wax should be applied to the section of the vehicle you are working on. It is best to use either horizontal or vertical rows of circles to ensure that the entire area is covered.
A thin layer where you can still see the paint color through the wax is ideal. When the wax is dry, it will appear matte and feel somewhat chalky. Using a microfiber towel, chamois, or other soft cloth, remove the wax from the surface of your car. Start by applying gentle pressure to the cloth and using a circular motion to remove the majority of the wax. Once the visible wax is gone, you can buff the car using a fast circular motion to increase the shine and luster of the paint.
After the wax is removed, the surface of your car should appear shiny and glossy. If possible, try to wax your car under some sort of protective cover. This could be a carport, tent, or other structure that provides cover from the elements. There are two main reasons why this is important. The first reason is that on a sunny day the surface of the car can become incredibly hot.
When you apply wax to the hot surface of your car the wax will almost immediately become dry and caked on. This makes it incredibly difficult to remove and you will be spending much more time and effort to remove the wax than would normally be the case. The second reason to wax under cover is in the event that it starts to rain.
If the surface of the car is wet, the wax will not adhere to the surface properly and will create a mess. The wax will run off the surface of the car and may get on surfaces you were not intending to wax such as molding and plastic body parts.
These types of material can be difficult to remove wax so it is important to wax your car under a controlled environment.
0コメント